Matched Arrows - Specification
For further details please request our arrow brochure using the Enquiry Form
|
Matching
Spine match +/- 2.5 Lb AMO or better
Weight Match +/- 10 grains or better
Shaft Materials
Pine Shafts 9/32", 5/16" or 11/32"
Sitka Spruce Shafts 5/16", 11/32"
Fletchings
Fletched from a choice of 2 1/2" or 3” fletchings from the standard colour and profile range see
Fletching Profiles and Fletching Colours
Finish
Finished with 3 coates of varnish
All shafts are marked with Hi Force brand.
Custom Options
I.e. 4 " Falchion Fletchings / tip spliciing / Numbering as indicated opposite please contact us.
Supplied with care and maintenance instructions.
|
 |
Prices
Shaft Form
|
Notes |
|
Price
£ Per Doz |
|
Parallel
|
Steel Taper Points fitted as standard, except 9/32" Shafts
|
|
£ 69.00
|
|
Rear Tapered
|
Improved arrow flight over parallel shafts. Fitted with brass points.
|
|
£ 81.00
|
|
Barelled
|
Fitted typically with 9/32" or 1/4" Brass piles
|
|
£ 99.00 |
We can also supply sets of 4,6 and 10 if required. Adjust price accordingly.
This level of matching is normally acceptable for most archers shooting moderate distances and should be the starting level for a first set of arrows.
If your shooting requires a higher level of matching please see
Tournament Arrows
Information required to make your arrows.
The following minimum information is required.
- Distance to be used and nature of shooting (Target / clout / field etc)
- Arrow length required measured from slot in nock to rear of pile.
- Draw weight at your loosing draw length. This can be estimated by adjusting the weight by 5% of the bow weight per inch of draw length + or - the bows marked weight.
- Fletching colour(s)
- Nock Colour(s)
Bow make, construction details.
This allows us to estimate the arrow spine.
Please request our specification sheet which summarises the details required.
See our specification sheet can be requested via Enquiry Form
Remember if you require us to copy your existing wooden arrows we can also do this.
| 
